|
Post by lancinator on May 25, 2015 19:18:27 GMT -5
I have the m3 installed on my drill and a speed cable from the ez steer 250 gps with it set to give 58.94 hz/mph and set the m3 to cal 16082. It says that I'm going 158 mph. Any ideas?
|
|
|
Post by la on May 27, 2015 5:45:30 GMT -5
Update, Stan got back with me and the guy that made my speed cable from the gps put the wires on pins 9 & 10, I moved them to 8&9 where they should've been and problem solved.
|
|